Filters
1-36 of 61 results
-
What Are UV-LED Curable Flatbed Inkjet Printers?
UV-LED flatbed inkjet printers offer speed, flexibility, and energy efficiency. Discover how this technology works and where it excels.
-
-
How to Increase Throughput In A Pad Print System: Seconds Matter
Pad printers are an excellent solution to product-marking and -decoration when runs are long, the artwork…
-
Uneven Ink Thickness
Explore the factors that lead to inconsistent ink thickness and learn how to achieve smooth, even deposition across the print area.
-
Smudged Image
Use this guide to troubleshoot smudging caused by improper ink transfer, curing, or handling—and restore sharp, durable prints.
-
Small Pinholes Are Apparent
This resource explains the causes of small pinholes in the print and provides steps to eliminate them for smoother, uniform coverage.
-
Opacity of Ink is Poor
Learn how to improve ink opacity by adjusting materials, process parameters, or ink selection to achieve stronger coverage.
-
Misregistration of Colors on Multi-Color Printing
Review this guide to correct color alignment issues and achieve precise registration across multi-color jobs.
-
Ink Sticks to Pad Surface
Find out why ink may remain on the pad rather than transferring correctly—and how to resolve the issue for clean, reliable prints.
-
Ink Does Not Meet Adhesion Requirements
Consult this resource to diagnose adhesion failures and optimize surface prep, ink choice, and process settings.
-
Image Appears Blotchy
Use this document to troubleshoot blotchy or uneven print areas and improve overall ink application and consistency.
-
Hairs on Edges of Images
This guide helps you pinpoint the causes of unwanted “hairy” edges or feathering and provides steps to eliminate them.
-
Fine Lines Begin to Close Up
Explore solutions for restoring fine-line detail when thin lines begin to fill in or lose definition during printing.
-
Distortion in Printed Image
Review this resource to understand the sources of image distortion and the adjustments needed to achieve accurate, consistent prints.
-
Color Transfers Between Pads on Multi-Color Jobs
Use this guide to identify why colors may be unintentionally transferring between pads and how to prevent cross-contamination in multi-color printing.
-
Blurred or Sharpness Problem
Learn how to diagnose and correct common causes of blurred or soft images to restore crisp, precise print quality.
-
How Do I Choose The Right Industrial Inkjet Printer?
With so many options available, selecting the right printer can feel overwhelming. This guide breaks down what to consider so you can choose with confidence.
-
What is “Drop-on-Demand” Printing?
Drop-on-demand technology is at the heart of modern inkjet printing. Learn how it works and why it offers precision, efficiency, and control.
-
How to Prevent UV Curing from Damaging Print Heads
When it comes to UV inkjet printing, reflective, transparent or glossy substrates do not always ‘play…
-
Ink Mixing – A Pad Printing Best Practice
Ink mixing for pad printing is a fairly simple task. However, when done incorrectly it can…
-
Pad Printing – It’s All About The Pad!
The print pad is one of (if not the) most important aspects of the pad printing…
-
Choosing A Mixing Cup For Pad Printing
Before the process of pad printing begins, it is important to know what kind of cup…
-
I Am A “New Guy” That Has Plans To Do In House Pad Printing
I am a “new guy” that has plans to do in house pad printing. I know…
-
Why Am I Getting A Washed Out Printed Image?
A washed-out image is a common frustration in printing. Discover what causes this issue and how small adjustments can restore bold, clean results.
-
Ink Leaking Over The Edge Of The Cliché
Have you ever had ink leaking over the edge of your cliché? You have tried to figure out…
-
How do you properly dispose of ink?
Proper ink disposal protects both your team and the environment. Learn best practices for handling and disposing of ink safely and responsibly.
-
How long after pre-treatment do you need to start printing?
Timing matters after surface pre-treatment. Find out how long you have to print—and why waiting too long can affect adhesion.
-
Advantages of Tagless Printing
Engineered Printing Solutions has worked with numerous apparel manufacturers of T-shirts, underwear, and lingerie in developing tagless printing…
-
What is the viscospatula designed to do?
Ink viscosity impacts every print you run. See how a viscospatula helps maintain consistency and why it’s an essential tool in pad printing.
-
Considering Our Custom “Hot Wind” Option For Your Pad Printer?
The essence of the pad printing process is ink management – achieving a complete transfer of…
-
How Do I Choose The Right Industrial Inkjet Printer?
That’s the million dollar question! (Don’t worry. It won’t cost that much.) We’ve already outlined how…
-
When Should You Replace Your Ceramic Rings?
Worn ceramic rings can quietly degrade print quality over time. Learn the warning signs that tell you it’s time for a replacement.
-
Maximize The Production Life of Print Heads
It is very important that whether it is an operator or maintenance that care is always…
-
What Is The Difference Between A Polymer Plate And A Thin Steel Plate?
Choosing the right plate material matters more than you might think. Explore the key differences between polymer and thin steel plates to find the best fit for your application.
-
Tools Required To Operate Pad Printing Machines
In the traditional sense there are very few tools required to operate pad printing machines. In…
-
How Do You Correct Distortion With Pad Printing?
Distortion means different things to different people. Beauty is in the eye of the beholder. We…
No results found.